These are Thermal Corporation’s standard mica band configurations with straps and post terminals. These are available for quick manufacture and shipment in the size restraints listed under each configuration.
Please let us know if you need terminations at a different location. We can design the mica band heater to your exact specifications. All the post terminals on the configurations shown are 10-24 thread.
Please Note: Exposed post terminals may be in violation of electrical codes depending on specific applications. We encourage compliance to applicable electrical codes and suggest using terminal boxes or ceramic terminal covers, where possible.
Ready to Order? Click here to request a quote by selecting Mica Band Heater from the Select a Product drop-down.
Configuration & Description
Configuration Diagram
Configuration 502 Post Terminals with Straps
One-piece mica band heater with post terminals located on each end and separate strap.
Diameters from 1-1/2" to 15"
Widths from 1" to 5"
For widths 5" to 10 ", specify Configuration 532.
Configuration 503 Post Terminals with Straps
Two-piece, post terminals on each end of each half, separate strap. When specifying wattage and voltage, give wattage and voltage for each individual half.
Diameters from 3" to 30"
Widths from 1" to 5"
For widths 5" to 10", specify Configuration 533.
Configuration 506 Post Terminals with Straps
One-piece heater, post terminals located side-by-side on one end, and separate straps.
Diameters from 3" to 14"
Widths from 2 1/2" to 10"
Configuration 507 Post Terminals with Straps
Two-piece band heater, post terminals located side-by-side on one end of each half, separate straps. When specifying wattage and voltage, give wattage and voltage for each individual half.
Diameters from 4" to 28"
Widths from 2 1/2" to 10"
Configuration 528 Post Terminals with Straps
One-piece, post terminals located two-in-line at one end, and separate strap.
Diameters from 3" to 15"
Widths from 1" to 5"
Configuration 529 Post Terminals with Straps
Two-piece band heater, post terminals located two-in-line at one end of each half, separate clamping strap. When specifying wattage and voltage, give wattage and voltage for each individual half.
Diameters from 3" to 30"
Widths from 1" to 5"
Configuration 532 Post Terminals with Straps
One-piece, post terminals located one on each end and separate straps. Same as Configuration 502 except with folded ends.
Diameters from 3" to 14"
Widths from 2" to 10"
Configuration 533 Post Terminals with Straps
Two-piece, post terminals located one on each end, and separate straps. Same as Configuration 503 except with folded ends. When specifying wattage and voltage, give wattage and voltage for each individual half
Diameters from 5" to 28"
Widths from 2" to 10"
Configuration 534 Post Terminals with Straps
One-piece expandable mica band heater (made as a one-piece heater, but notched and designed to be bent open to fit over a cylinder, then closed), post terminals located on each end, separate strap.
Diameters from 3" to 15"
Widths from 1" to 5"
*Discounts May Apply. Call for Discounts Based on Order Quantity.
Written by Jennifer Taylor & Shelby Reece Date Published: 01.17.2014 Last Updated: 03.11.2020
These are Thermal Corporation’s standard mica band configurations with straps and post terminals. These are available for quick manufacture and shipment in the size restraints listed under each configuration.
Please let us know if you need terminations at a different location. We can design the mica band heater to your exact specifications. All the post terminals on the configurations shown are 10-24 thread.
Please Note: Exposed post terminals may be in violation of electrical codes depending on specific applications. We encourage compliance to applicable electrical codes and suggest using terminal boxes or ceramic terminal covers, where possible.
